Everything is from a 2017 Goldwing Audio Comfort. Only thing I had to order from Honda was the Left side Forward Muffler Chrome piece. It makes the rear tire off the ground by 3/4 inch. Good for cleaning the wheel,checking oil and just taking up less room in the garage.
X
-
Originally posted by Winger66 View PostEverything is from a 2017 Goldwing Audio Comfort. Only thing I had to order from Honda was the Left side Forward Muffler Chrome piece. It makes the rear tire off the ground by 3/4 inch. Good for cleaning the wheel,checking oil and just taking up less room in the garage.
Thank you very much !
- Quote
- 1 like
Comment: (For off-topic replies)
-
Originally posted by Winger66 View PostKeep in mind that the part # 18417-MJK-G40 is for the (Black) Muffler Cover..........The (CHROME) part # is 18417-MCA-A20
Thanks again.
- Quote
Comment: (For off-topic replies)
-
[QUOTE=GWRider;n107415]
Thank you very much. Did you buy everything you needed through your Honda dealer ?
Thanks again.
GW RIDER: I bought only the muffler protector (chrome) and 1 bolt that didnβt come with the stuff I bought used. The rest of the stuff came from Trikes By Rodney = in Zanesville Ohio. You could also prolly find the parts Alot cheaper via a trike conversion builder. Honda Also Does sell all the parts necessary for this job. Just let them know itβs for a 2012 up to a 2017 Goldwing. That way they will get you ALL the parts deemed necessary to get the job done right. You definately will need to have the bike stabilized upright to make this go the easiest. I used a 14 inch square scissor Jack under my Valkyrie and I strapped it to the Jack also .
- Quote
Comment: (For off-topic replies)
-
[QUOTE=Winger66;n107448]Originally posted by GWRider View Post
Thank you very much. Did you buy everything you needed through your Honda dealer ?
Thanks again.
GW RIDER: I bought only the muffler protector (chrome) and 1 bolt that didnβt come with the stuff I bought used. The rest of the stuff came from Trikes By Rodney = in Zanesville Ohio. You could also prolly find the parts Alot cheaper via a trike conversion builder. Honda Also Does sell all the parts necessary for this job. Just let them know itβs for a 2012 up to a 2017 Goldwing. That way they will get you ALL the parts deemed necessary to get the job done right. You definately will need to have the bike stabilized upright to make this go the easiest. I used a 14 inch square scissor Jack under my Valkyrie and I strapped it to the Jack also .
Did that list of parts come Trikes By Rodney? Also, I haven't yet looked, but I'm guessing the Valkrye has the mounting bracket for the stand already welded on the frame ?
Thanks again
- Quote
Comment: (For off-topic replies)
-
The parts were ALL from a 2017 Goldwing. The parts were used and they were appropriated from a Honda Trike Builder. Only thing I Had to order from Honda was a bolt and the Left side Muffler Cover... yes the Valkyrie already has the Mount for the Center Stand on it.
- Quote
Comment: (For off-topic replies)
Related Topics
Collapse
-
by waterboyThis is my first motorcycle. Does someone make a kick plate for the center stand? Thank you.
-
Channel: 2018-2020 Gold Wing/Gold Wing Tour
07-15-2019, 11:22 PM -
-
by BinsjohnI just bought a new '18 Tour. Brought it home and tried to put it up on the center stand to check a few things. NO DICE! I could almost do it, but not quite. I'm an old fart, but I've had more than thirty...
-
Channel: 2018-2020 Gold Wing/Gold Wing Tour
04-20-2019, 11:23 AM -
-
by Bill WI am still unable to get 2018 Goldwing Tour on center stand. Process seems wobbly and afraid it will fall to the right and pull me over on top of it.
any suggestions?...-
Channel: 2018-2020 Gold Wing/Gold Wing Tour
11-24-2018, 07:19 PM -
-
I have a traxxion dynamics kickstand pad attached to my 2019 kickstand. When parking over night at a campground or hotel parking lot in windy conditions is the bike more stable on the kickstand or the...
-
Channel: 2018-2020 Gold Wing/Gold Wing Tour
11-23-2020, 02:16 PM -
-
by telcoman48I have a GL 1800 with a Ride Off Center Stand. Does anyone know the part number for the rubber piece where you step down and add pressure to use this Center Stand. The last time I bought this rubber piece...
-
Channel: GL1800 Owners (2001-2017)
08-17-2014, 06:53 PM -
Comment: (For off-topic replies)