Pathfinder led lights high and low beam

  • Filter
  • Time
  • Show
Clear All
new posts

  • Pathfinder led lights high and low beam

    If anyone has installed triduim fog lights I was wondering where you hid the wires and the little led box.Am thinking about taking the nose off bike would it be easier for me to strap things out of the way of steering head and forks.2017 wing

  • #2
    I can take the front cowls off the bike in 18 minutes.

    I have multiple sets of headlights.

    I find its faster and easier to swap headlights when I wanted to use HIDs.

    I installed the Ballasts between both headlights. (Similar to what you are asking)

    I made aluminum plates to mount the Ballast.

    Click image for larger version  Name:	P5260056.JPG Views:	0 Size:	389.4 KB ID:	110250

    Click image for larger version  Name:	P5260055.JPG Views:	0 Size:	326.7 KB ID:	110248

    Each Headlight has 3 Boss's you can use a self tapping screw to mount the plate to, then mark where you want to mount your LED Igniter.
    Drill a hole for each screw in the plate.
    I drilled a couple small holes to secure the wiring with small ty-wraps.

    Here is a close of each plate.

    Click image for larger version  Name:	P6050004.JPG Views:	0 Size:	384.2 KB ID:	110249
    ************************************************** *******
    Maker of the 01-17 GL1800
    "Rocky Tree & Comfort Risers".
    Current bikes.
    1981 CB900C 10 speed (Restored)
    1986 GL1200 SEi
    2004 GL1800

    Comment: (For off-topic replies)

    • #3
      Thanks for the info that’s very neat and tidy.I will give it a go

      Comment: (For off-topic replies)

      Sorry, you are not authorized to view this page

      Related Topics