Honda Fog Lights!

[recon]

How do I make the Honda fog lights work with the High beams on? The Honda lights did not come with a jumper or instructions on how to do this! Please Advise!

[bullyboy]

I'm not officially telling you that there is a wire in the plug under the shelter that you need to unpin from the connector, but I can't remember which one.

Nope...didn't hear it from me.

[Cruiseman]

My SoCalMotoGear fog lights came with a jumper that replaced the relay on the OEM-style harness that allows the lights to remain on with the high beams. But, I cannot tell you which pin is being "jumped", I would have to pull it apart. Someone will know the answer though.

[Westdc]

Find the fog lamp switch relay in the left side of the fairing.Pull the trigger wire connector blue - insulate (tape) the spade tip connector and the light will stay on

[speckfisher]

Find the fog lamp switch relay in the left side of the fairing.Pull the trigger wire connector blue - insulate (tape) the spade tip connector and the light will stay on

Thank-you

[Lone Ranger]

How do I make the Honda fog lights work with the High beams on? The Honda lights did not come with a jumper or instructions on how to do this! Please Advise!

I sent you a PM.